Dreame DreameBot D9 Plus Manual Del Usuario página 10

Routine Maintenance
EN
Main Brush, Side Brush and Universal Wheel
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use a proper tool to
remove the hair tangled in the brush.
3. Remove and clean the side brush.
4. Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel. Do not use excessive force.
1
2 3
4
14
Charging Contacts and Robot Sensors
Clean the charging contacts, robot sensors and the signaling area of the base
station with a soft, dry cloth:
Laser Distance
Sensor (LDS)
Return-to-Base Sensor
Bumper
Cliff Sensors
Charging
Contacts
Signaling
Area
Charging
Contacts
Note: Wet cloth can damage sensitive elements within the robot and the base
station. Please use dry cloth for cleaning.
Routine Maintenance
Replace the Dust Collection Bag
It is recommended to replace the bag every 4-6 weeks.
1. Discard the dust collection bag
Note: When taking out the dust collection bag, close the dust bag handle to
avoid dust leaking out.
2. Wipe the filter with a dry cloth
3. Install a new dust collection bag
4. Close the upper cover of auto-empty base
Note: Do not close the base forcelly, if the upper cover of base cannot be
closed and the dust collection bag is not installed.
EN
15