Kärcher WRS 200 2.200-000.0 Manual Del Usuario página 23

ATTENTION ● Pay attention to the safety inspection for
mobile devices for industrial use in accordance with the lo-
cally applicable regulations ● Short-circuits or other dam-
age. Do not clean the device with a hose or high-pressure
water jet. ● Do not use acetone, undiluted acids or sol-
vents, as they corrode the materials used on the device.
5 WRS 200 device overview
Burner sight glass
1
Battery
2
Dosing pump
3
RM 110 container system care
4
Water filter
5
Fuel canister
6
High-pressure hose storage compartment
7
Control panel
8
Burner blower
9
Pressure control
10
Filler opening lid
11
4.11 Accessories and spare parts
CAUTION ● Only use accessories and spare parts
which are approved by the manufacturer. Only original ac-
cessories and original spare parts ensure that the appli-
ance will run fault-free and safely. ● Only have repairs and
installation of spare parts performed by the approved Cus-
tomer Service in order to prevent any hazards.
High-pressure pump
12
Oil level sight glass
13
Note
Please note: All types of fuel are simply referred to as "fuel"
in these operating instructions.
English 23