Gymrex GR-MG 51 Manual De Instrucciones página 23

STEP III
a) Insert the adjustment bracket with a leg lock (5) into the axis of the main frame
hole.
b) In order to install the leg lock, place external safety caps, internal covers and
sleeves
All connections of the machine should be fixed and pressed correctly. After
completing the assembly activities, it is allowed to start working with the
machine.
Before each use, adjust the distance of the leg lock from the backrest according
to your needs. This distance is adjusted by releasing the adjustment lock and
extending or retracting the bracket. After determining the desired working
height, lock the bracket by mounting the adjustment lock in a given hole.
NOTE! After each adjustment remember to check that the adjustment
lock has been seated correctly.
3.3. Cleaning and maintenance
a) After each cleaning, all components should be well dried before the device s
used again.
on the adjustment bracket.