Tristar KZ-1228 Manual De Usuario página 8

Instruction manual
6. Pour the coffee powder into the permanent filter.
7. Insert the filter compartment cover into the filter compartment and
close the filter compartment.
8. Place the glass pot on the hotplate.
9. Press the grind off button to switch off the grinding mechanism of
the coffee machine.The grind off button lights up.
10. Press the on/off button to switch the device on. The on/off button
lights up.
11. As soon as you have pressed the on/off button, the brewing
procedure begins.
12. After the brewing procedure, you can take the glass pot from the
hotplate and serve the coffee.
13. After the brewing procedure, the hotplate remains on for another two
hours and then switches off automatically.
14. If you would like to turn off the coffee machine before the two hours
have passed, press the on/off button.
15. Clean the device after use as described in the "Care and Descaling"
chapter. The coffee machine has a non-drip valve. You can also take the
glass pot from the hotplate during the brewing procedure and pour
yourself a cup of coffee. But be careful: You should place the glass pot
back on the hotplate within 20 seconds to prevent the coffee filter from
overflowing with water!
Timer Function
The coffee machine has an automatic coffee brewing function. You can
select a starting time at which the coffee machine automatically starts the
brewing procedure. To do so, take the following steps.
1. Fill the coffee machine as described in the "Brewing Coffee with Freshly
Ground Beans" and "Brewing Coffee with Powder Coffee" sections
according to whether you would like to brew coffee with freshly
ground beans or with powder coffee.
8
2. You should now set the starting time at which the coffee machine
automatically starts the brewing procedure by pressing the Program
button for 3 seconds until the Program button flashes. Now set the
automatic starting time using the Hour and Minute buttons.
3. Press the Program button again to confirm your entry. The Program
button will now light up without flashing.
4. The current time then appears on the display again.
5. The brewing or grinding procedure now starts at the set time.
Tip: You can also start the grinding or brewing procedure at any time
before the set starting time. To do this, press the Program button once
to switch of the timer and then press the On/Off button to start the
grinding or brewing procedure manually.
6. After the brewing procedure, you can take the glass pot from the
hotplate and serve the coffee.
7. After the brewing procedure, the hotplate remains on for another two
hours and then switches off automatically.
8. If you would like to turn off the coffee machine before the two hours
have passed, press the on/off button.
9. Clean the device after use as described in the "Care and Descaling"
chapter.
cHaNgINg waTeR FIlTeR
To produce a more aromatic coffee flavour, the device has a water filter
which is inserted in the water reservoir. If the
"FILTER" are shown on the display, the water filter should be replaced.
1. Open the water reservoir lid and pull out the water filter by its bracket.
2. Open the lower part of the water filter bracket, take out the water filter
and dispose of it.
symbol and the word