dirna Bergstrom bycool green line SPLIT Instrucciones De Montaje página 17

SPLIT
5
Secure the evaporator with (4) 8/125x20 screws
with grower and flat washer when using M6 rivet
nuts and (4) 8/100x30 screws and M8 nuts with
flat washers for throughbores.
5
6
Place nut caps on the outside of the cabin.
7 Introduce the coil in the tray, connect the blower
and anti-freeze sensor cabling, and take out the
cabling through the bushing.
8 Connect the 3/8 and 5/8 piping in the evaporator,
securing them to the expansion valve with the
supplied flange and 6/100x15 screw.
Air conditioning for vehicles
5
7
8
17
EN