Description Of Control Panel; Basic Controls; Table 2 Control Panel - Veetsan VDH63 Manual De Instrucciones Para El Uso

F

DESCRIPTION OF CONTROL PANEL

Described below are all the single keys and functions present in the various control panel models listed above. Some
functions are shared by all models of the range, whereas others are available only on several versions.
F1

Basic controls

On/Off
This key indicates the status of the equipment: on or off.
When the appliance is on, the key is lit.
Wash cycle 1
This button starts wash cycle 1. This cycle is recommen-
ded for washing not very dirty dishes.
Wash cycle 2
This button starts wash cycle 2. This cycle is recommen-
ded for washing very dirty dishes.
Legend
A
A = On / Off
B = "Tank temperature" indicator light
C = "Water tap" indicator light
B
D = "Boiler temperature" indicator light
E = Wash cycle 1
C
F = Wash cycle 2
G = Parameter button 1
D H = Parameter button 2
I = Drain / self-cleaning cycle
L = Delime cycle (this function can only be activated by a specialised
technician)
E
The temperature shown on the display is that of the tank if the light "B" is
on, or of the boiler if the indicator light "D" is on. The tank temperature is
F
displayed during the wash cycle and the boiler temperature during the
rinse cycle.
G
H
I
L

Table 2 Control panel

Drain / self-cleaning cycle
This button starts a drain / self-cleaning cycle.
Delime cycle (only be activated by a specialised
technician)
This button is used to run a machine water circuit delime
cycle.
17