DBDrums Multi Sample Pad Manual Del Usuario página 28

EFFECT
Allows you to have control over the master effects on
the nPad. Use the SELECT button to scroll between
EQ, Reverb and Limit.
EQ
A built-in 3-band EQ, which can shape the overall
sound of the nPad.
SWITCH
Turns on or off the EQ.
HIGH
Adjust the treble frequencies +/- 12dB.
MID
Adjust the mid-range frequencies +/-12dB.
LOW
Adjust the bass frequencies +/- 12dB.
REVERB
Built-in reverb providing ambience for the nPad.
SWITCH
Turns on or off the REVERB.
TYPE
Choose between room, stage and studio.
LIMIT
Built-in limiting feature.
SWITCH
Disable or Engage the Limiter feature.
THRESHOLD
When set to 0, input and output are the same, when
set to -12 the output is ¼ of the maximum output.
User Manual
ADV
Gives you access to advanced editing features.
Tuning
Tune a sample up or down, the range is from -12 to
+12. This only works on sample A.
Muffling
Adjusts the amount of muffling effect on an individual
sample. This only works on sample A.
Layer Point
When the pad is set to have both sample A and
sample B, any hit louder than this setting (0-127) will
play sample B. For example, any hits below 50 will
play sample A, any hits above play sample B.
Type
Allows you to choose between OFF, MIX, SWITCH
and FADE.
OFF
Only play sample A, sample B will not engage.
Sound Volume
MIX
When the layer point threshold is met, sample B
will be blended in with sample A.
Sound Volume
SWITCH
When the layer point threshold is met, sample B
will take the place of sample A.
Sound Volume
FADE
When the layer point threshold is met, sample B
will start fading in along the sample A.
Sound Volume
Striking force
Striking force
Striking force
Striking force
10