Publicidad
Idiomas disponibles
Idiomas disponibles
Using t he GEOM (Geom et ry) On-
screen Display
The GEOM (geometry) settings allow you to adjust the
shape and orientation of the picture.
Once the rotation is adjusted, it will be stored in memory for
all input signals received. All other adjustments will be
stored in memory for the current input signal.
1
Press the M ENU button.
The MENU OSD appears.
MENU
2
Press the ¨. / > and >? / / buttons to select "
GEOM ," and press the M ENU button again.
The GEOMETRY OSD appears.
3
Press the ¨. / > buttons to select the item you w ant
to adjust.
Select
ROTATION
PINCUSHION
PIN BALANCE
KEYSTONE
KEY BALANCE
Downloaded from:
https://www.usersmanualguide.com/
GEOMETRY
26
ROTATION
To
adjust the picture rotation
adjust the picture sides
adjust the picture side balance
adjust the picture width
adjust the picture shape balance
Get t ing St art ed
Cust omizing Your M onit or
4
Press the >? / / buttons to adjust the settings.
For
Press
ROTATION
/ . . . to rotate the picture clockwise
? . . . to rotate the picture counterclockwise
/ . . . to expand the picture sides
PINCUSHION
? . . . to contract the picture sides
/ . . . to move the picture sides to the right
PIN BALANCE
? . . . to move the picture sides to the left
/ . . . to increase the picture width at the
KEYSTONE
top
? . . . to decrease the picture width at the
top
KEY BALANCE
/ . . . to move the top of the picture to
the right
? . . . to move the top of the picture to
the left
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The selected item is reset to the factory setting.
EN
F
ES
C
11
Publicidad
