Descargar Imprimir esta página

Sony Trinitron GDM-500PS Manual De Instrucciones página 13

Ocultar thumbs Ver también para Trinitron GDM-500PS:

Publicidad

Idiomas disponibles

Idiomas disponibles

4
Fine tuning the color temperature
Press the ¨./> buttons to select an item and adjust by
pressing the >?// buttons.
Select R (red), G (green), or B (blue) BIAS to adjust the
black level of each color's signal.
Select R (red), G (green), or B (blue) GAIN to adjust the
white level of each color's signal.
The "5000K," "6500K" or "9300K" disappears and the
new color settings are memorized for each of the three
color modes.
The color temperature modes change as follows:
5000Kn 1, 6500Kn 2, 9300Kn 3
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on. The
selected item is reset to the factory settings.
Downloaded from:
https://www.usersmanualguide.com/
Using t he SCREEN On-screen
Display
COLOR
You can adjust convergence settings to eliminate red or blue
1
6500K 9300K
shadows that may appear around objects on the screen.
R B I AS
76
G B I AS
50
Adjust the CANCEL MOIRE function to eliminate wavy or
B B I AS
50
R GAIN
50
elliptical patterns that may appear on the screen.
G GAIN
50
B GAIN
50
Adjust the LANDING function to correct color imbalances
at the four corners of the screen due to influence from the
earth's magnetism.
Once CANCEL MOIRE is adjusted, it will be stored in
memory for the current input signal. All other adjustments
will be stored in memory for all input signals received.
1
2
3
Select
H CONVERGENCE
V CONVERGENCE
V CONVER TOP
V CONVER BOTTOM
Get t ing St art ed
Cust omizing Your M onit or
Press the M ENU button.
The MENU OSD appears.
MENU
Press the ¨. / > and >? / / buttons to select "
SCREEN," and press the M ENU button again.
The SCREEN OSD appears.
Press the ¨. / > buttons to select the item you w ant
to adjust.
To
adjust the horizontal convergence
adjust the vertical convergence
TOP
adjust the screen's upper vertical
convergence
BOT
adjust the screen's lower vertical
convergence
EN
F
SCREEN
ES
TOP
BOT
26
C
ADJ
H CONVERGENCE
(cont inued)
13

Publicidad

loading

Este manual también es adecuado para:

Trinitron gdm-400psTrinitron gdm-200ps