Bollhoff RIVKLE B2007 Manual De Uso página 31

1 - Operating principle and technical features of the device
Setting methods
The "setting method" comprises
Pressure setting method: force controlled setting
F
setting force is controlled irrespective of the thickness of the workpiece.
This setting principle is particularly well suited to workpieces with variable thickness (plastic parts,
various layers...) and provides consistent setting quality.
Advantages:
Optimised setting into panels with thickness variations
I
Possibility to set the same RIVKLE
I
Permits quality control (force indicator...)
I
Extended mandrel life
I
Can also set different types of RIVKLE
I
Spin on, Insert,
Spin on Insert
In the stroke setting method, the tool delivers a constant stroke. When
there is a variation in thickness of the workpiece there is a definite risk
that a blind rivet nut may not be set properly, or become damaged due
to the setting mandrel damaging the RIVKLE
there will be premature wear of the mandrel.
This phenomenon is eliminated with the pressure setting method as the
more than once
®
with one tool and one single setup
®
Crimp and Spin off cycles.
Crimp
thread. In this situation
®
Spin off
31