Bollhoff RIVKLE B2007 Manual De Uso página 34

2 - Preparation for use
Charging the battery
• Store the battery charger in a cool and ventilated area.
• Plug the battery into the power outlet. SAFETY WARNING: make sure the power supply source is
compatible with the requirements indicated on the product plate.
• Insert the battery it in the battery charger keeping it parallel. Do not force the battery since it should slide
easily in place. Any possible difficulty may indicate an incorrect alignment.
Connection to the battery
The device is delivered with a 14.4 V / 2.6 Ah battery power supply.
To connect the battery to the tool:
• Take the tool
• With your other hand, take the battery so that the quick-release lever is facing downwards
• Insert the battery into place by sliding it upwards until the quick-release lever on the battery clicks.
It is required to use only the original battery to ensure proper operation of the device.
Assembling the device
SAFETY: BEFORE CARRYING OUT ANY INTERVENTION ON THE DEVICE, DISCONNECT
THE BATTERY
You have two assembly options:
• Fitting with special RIVKLE
• Fitting with standard capscrews
Fitting with special RIVKLE
Fork and nose for studs & force
>18 kN (M8 & M10) - Fig. 3
34
mandrels (recommended by BÖLLHOFF for extended tool life)
®
mandrels
®
M3 M4
236 113 XX 020
03 04 05 06 08
376 113 XX 020
–
236 113 XX 030
03 04 05 06 08
376 113 XX 030
–
236 166 00 303
236 166 00 304
3 18 kN
M5 M6 M8
236 913 08 110
04 05 06 08
04 05 06 08
18 22 kN
M8 M10
236 913 10 019
–
08 10
–
X