Bollhoff RIVKLE B2007 Manual De Uso página 39

3 - Use
The device can be used in all positions, carried by hand or suspended.
Procedure for use
• Install the battery
• Switch the device on, by pulsing on the main trigger
• Position the RIVKLE
automatic screwing of the RIVKLE
RIVKLE into the hole.
®
• Alternatively, insert the RIVKLE
to activate the push-pull.
• Press the trigger and hold it until the mandrel has unscrewed from the RIVKLE
KEEP THE TRIGGER PRESSED FOR THE ENTIRE DURATION OF THE CYCLE.
IF THE TRIGGER IS RELEASED, THE INSERTION IS NOT CORRECT
Push pull (automatic)
Unscrew button
• If unscrewing is difficult, use the CENTER (UNSCREW / RESET) button.
To unscrew, hold the button down until the mandrel has fully unscrewed from the RIVKLE
thread.
on the mandrel. A light pressure starts the motor and causes the
®
, then the shutdown (Push-Pull system). Then insert the
®
into the hole, then push the mandrel against it in order
®
Insert Crimp Spin off (automatic)
thread.
®
®
39