Operation; Before Initial Use - Dometic COOLFREEZE CFX28 Instrucciones De Uso

Nevera por compresor
Ocultar thumbs Ver también para COOLFREEZE CFX28:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CFX28 – CFX100W
7

Operation

7.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 25).
Reversing the lid opening direction (CFX50W, CFX65W, CFX65DZ)
The lid hinges can be moved to the opposite side if you want to open the lid from the
opposite direction. To do this, proceed as follows:
➤ Open the lid and remove it (fig. 5 A, page 5).
➤ Remove 3 screws per hinge (fig. 5 B, page 5) and take off hinges.
➤ Remove plastic covers from new hinge positions with a small screwdriver and
re-fit to old hinge positions.
➤ Re-fit hinges in new positions.
➤ Insert the lid in the hinges on the opposite side (fig. 5 C, page 5) (CFX50W,
CFX65W, CFX65DZ only).
Additionally the centre hinge has to be changed (CFX100W only):
➤ Remove two plastic covers from the centre hinge (fig. 6 A, page 5).
➤ Remove four screws from the centre hinge (fig. 6 B, page 5) and take off the
hinge.
➤ Remove the plastic cover from new centre hinge position with a small screw-
driver and re-fit to old hinge position (fig. 6 C, page 5).
➤ Re-fit centre hinge in new position.
➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 5).
EN
Operation
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido