Radio Operations; Manual Memory; Manual Tuning - Clarion VX409 Manual De Instrucciones

Radio Operations

Listening to the radio
1. Press the [MENU] button, and touch the
[TUNER] key.
The TUNER mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key to select the radio band. Each time the
button is pressed, the radio reception band
changes in the following order:
FM1 FM2 FM3
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. Touch the [ ] or [
seek a station.
• When touching the [
sought in the direction of higher
frequencies.
• When touching the [
sought in the direction of lower frequencies.
Selecting presets by direct access
This function displays the Key Pad on the screen
allowing you to tune by entering a preset number.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. Touch the [DIRECT] key to display the Key
Pad screen.
3. Touch the [0] to [9] key corresponding with the
preset you desired. When you input the
wrong number, touch the [
the last input number.
4. Touch the [ENT] key to tune in to the entered
preset.

Manual tuning

1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. Touch the [ ] or [
select a station.
• When touching the [
is tuned in the direction of higher
frequencies.
• When touching the [
is tuned in the direction of lower frequencies.
22
VX409/VZ409
AM FM1...
] key to automatically
] key, the station is
] key, the station is
] key to delete
] key to manually
] key, the frequency
] key, the frequency
Recalling a preset station
There are total of 48 preset positions (12-FM1,
12-FM2, 12-FM3, 12-AM) to store individual
radio stations in memory.
There are 2 ways available to recall the preset
station.
Using the remote controller
1. Press the [BAND] button to select the desired
band (FM or AM).
2. Press the preset number desired on the 0-9
numeric keypad.
Using the Preset List screen
1. Touch the [List] key.
2. Touch the corresponding Preset key to recall
the stored station.
* You can select the desired band by touching
the [Band] key. Scroll through pages using
scroll bar buttons to the right of the presets.
* Touching and holding the desired Preset key
for more than 2 seconds will store the current
station to the preset memory.
3. Touch the [List] key to return to the previous
screen.

Manual memory

1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Select the desired station with the seek
tuning, manual tuning, or preset tuning.
3. Touch the [List] key.
4. Touch and hold one of the Preset key for more
than 2 seconds to store the current station into
the preset memory.
5. Scroll through the 3 pages of presets in each
band by pressing the scroll bar buttons to the
right of the presets.