KitchenAid KFGD500EBS Guia página 9

To Use:
NOTE: For best results, preheat your oven to the desired
temperature prior to using EasyConvect
preheating is complete, press OFF LOWER before using
EasyConvect Conversion.
™
1. Press EASY CONVECT until the desired option (MEATS,
BAKED GOODS or OTHER) is displayed.
2. Press START.
3. Press number pads to enter standard cook temperature, and
then press START.
4. Press number pads to enter standard cook time, and then
press START.
5. Place the food in the oven.
Check food for doneness before the stop time is reached. If
food will not be done when the stop time is reached, add more
cooking time before time elapses. See "Cook Time" section.
At the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished.
7. Remove food from the oven.
Slow Cook
Recommended Temperature Range:
4 hour cook time = 250°F to 300°F (120°C to 150°C)
8 hour cook time = 200°F to 250°F (93°C to 120°C)
12 hour cook time = 170°F to 226°F (77°C to 108°C)
� Food should be completely thawed.
� Cover food to keep moist.
� Prior to Slow Roasting, meat can be pan seared or broiled on
the sides to enhance browning, flavor, and tenderness.
� Use a flat rack in position 3 for best results.
To Use Slow Cook:
Before using Slow Cook, see the "Positioning Racks and
Bakeware" section. It is not necessary to preheat the oven.
1. Place food in the oven.
2. Press SLOW COOK for the desired oven.
3. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of temperatures
allowed, the minimum or maximum allowed temperature will
be displayed. Enter a temperature in the allowable range.
4. Press START.
"Preheating" will show in the display until the set temperature
is reached. When a minimum oven temperature is reached,
the oven display will show the temperature increasing. A
single tone will sound when the set temperature is reached.
5. Press OFF for the selected oven when finished.
Proofing Bread
Proofing bread prepares the dough for baking by activating the
yeast. Follow the recipe directions as a guide. Standard Proof
should be used for fresh dough, thawed dough, and for the first
and second rise. Rapid Proof (on some models) operates at a
slightly higher temperature than Standard Proof, and it can be
used for the second rise of formed dough.
To Proof:
Before first proofing, place the dough in a lightly greased bowl and
cover loosely with wax paper, coated with shortening. Place in
position 2, and then close the oven door.
1. Press BREAD PROOF until the desired proof is displayed
("Standrd" or "Rapid").
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time
may vary depending on dough type and quantity.
3. Press OFF when finished proofing.
Conversion. After
™
Before second proofing, shape the dough, place it in baking pan
(s) and then cover loosely. Follow the same placement and control
steps above. Before baking, remove the cover.
NOTE: If the oven temperature is greater than 120°F (49°C), the
display will indicate "oven cooling" until the temperature is below
120°F (49°C).
Cook Time
To Set a Timed Cook:
1. Press the keypad for any cooking function except Self-Clean,
Bread Proof (on some models), or Keep Warm.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the
temperatures allowed, the minim or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time to cook.
5. Press START for the desired oven. The display will count
down the time. When the time ends, the oven will shut off
automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 through 5.
6. Press OFF for the desired oven to clear the display.
To Set a Delayed Timed Cook:
1. Press DELAY START.
2. Press the number "1" or "2" keypad to select the desired oven.
3. Press the number keypads to enter the number of hours
and/or minutes you want to delay the start time.
4. Press the keypad for any cooking function except Bread Proof
or Keep Warm.
5. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the
temperatures allowed, the minimum or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
6. Press START or COOK TIME.
7. Press the number keypads to enter the length of time to cook.
8. Press START for the desired oven.
When the start time is reached, the oven will automatically turn
on. The temperature and/or time settings can be changed
after the delay countdown by repeating steps 1 through 7.
When resetting the time and temperature, it is necessary to
press START for the desired oven between steps 4 and 5 to
continue making changes.
When the set cook time ends, the oven will shut off
automatically.
9. Press OFF for the desired oven to clear the display.
9