4
TEST INSTALLED FITTING
• Move HANDLE (1) into "off" position.
• Remove AERATOR (4) with the supplied aerator key.
• Turn on water supplies and check all connections for leaks.
CHECK DRAIN CONNECTIONS
• Check that DRAIN STOPPER (3) makes a good seal.
• Check all drain connections and
"P" trap for leaks.
Tighten if necessary.
5
SERVICE
• Aerator may accumulate dirt and debris causing reduce flow. Unthread the aerator with the aerator key and
flush the water lines. Clean and reinstall the aerator.
• To remove the drain stopper for cleaning, rotate counterclockwise and lift up.
1
HOT
3
WASTE
OUTLET
"P" TRAP
2
ON
OFF
COLD
4
2