Coway AIRMEGA ProX Manual Del Usuario página 13

Air quality sensor sensitivity adjustment
Air quality indication guide
Tier 1 (Good)
PM1.0 (㎍/㎥) 1~12
PM2.5 (㎍/㎥) 1~12
PM10 (㎍/㎥) 1~54
How to adjust the sensitivity of the air quality sensor
When you operate the product for the first time, the air quality sensor is set at the normal sensitivity. If the air quality indicator
remains at "Very Unhealthy (Red)" or Good (Blue) for more than two hours, you can adjust the sensor's sensitivity as follows.
3 sec. 3 sec.
3 sec. 3 sec.
Tier 2 (Moderate) Tier 3 (Unhealthy)
13~35
13~35
55~154
1_
While the product is operating, press the
Airflow speed button and the PM information
button simultaneously for more than 3
seconds.
2_
Display the current air quality sensor
sensitivity on the digital Indicator. To indicate
the air quality sensor sensitivity is being
adjusted, the Level 1 Airflow Speed Indicator
and PM1.0, PM2.5, and PM10 indicators are
turned on.
Level
Sensitivity
3_
Press the PM information button to change
the air quality sensor sensitivity.
4_
If the Airflow speed and PM information
button are pressed and held simultaneously
for more than 3 seconds, or if left alone for
more than 7 seconds, then the selected air
quality sensor sensitivity is applied.
Tier 4 (Very Unhealthy)
36~55
36~55
155~254
1 2
High Normal
56~
56~
255~
3
Low
12