Coway AIRMEGA ProX Manual Del Usuario página 16

04. MAINTENANCE
How to clean Pre-filter
When the Pre-filter maintenance indicator is on, clean your Pre-filter on both sides. Follow these instructions below
to clean the filter.
Pre-filter Pre-filter Cover
frame
Filter cleaning and replacement cycle
Filter
Pre-filter
Max2 filter
15
Pre-filter Pre-filter Cover
frame
Cleaning/Replacement time
Once / 2~4 weeks
Once / 12 months
1_
Remove the both sides of covers and
Pre-filter.
NOTE
While removing it, do not let dust drop to it.
•
Care must be taken with the protrusions on
•
both sides when you remove the Pre-filter
cover from the filter lid.
2_
Remove dust with a vacuum cleaner
or water.
If_vacuuming_does_not_seem_to_sufficiently_
clean_the_Pre-filter,_gently_wash_them_under_
the_water.
CAUTION
If you use water to clean the Pre-filter,
dry the Pre-filter in the shade before re-
installing it.
3_
Dry off the pre-filter and mount it in
the pre-filter frame. Then, combine
the pre-filter frame with the cover,
insert the cover into the lower
hanger and upper hook precisely,
then close the cover.
4_
Press and hold the Airflow speed
button on the control panel to reset
the filter usage.
Cleaning/Replacement
Replacement
Washable