Leica Q3 Instrucciones Abreviadas página 12

Status LED
18
– Memory card access
– Using the WLAN function
– Firmware update in progress
– Charging process (wireless charging and
charging via USB)
Directional pad
19
in the menu:
– Menu navigation
– Applying menu settings
in shooting/recording mode:
– Shifting the AF metering field
Center button
20
in the menu:
– Applying menu settings
in shooting/recording mode:
– Direct access to menu functions
– Factory setting:
in review/playback mode:
– Factory setting:
Speaker
21
Battery compartment
22
Battery release lever
23
Tripod thread
24
A 1⁄4 DIN 4503 (1⁄4")
Memory card slot
25
Alignment point for macro function
26
Macro ring
27
Focus ring
28
Aperture ring
29
Thread protection ring
30
AF/MF lock release
31
Focus tab
32
HDMI port
33
USB-C port
34
The use of a 9 V/3 A (≥ 27 W) AC adapter is
required where camera operation is desired
while the battery is recharging.
Only the mains cables supplied must be used.
The mains cables must only be used for the
supplied charger unit. Do not attempt to use the
mains cable or charger unit for other purposes.
Toggle Info Levels
Toggle Info Levels
PERMITTED CONNECTION TYPES
TETHERING PHOTO VIA USB-C
TETHERING VIDEO VIA USB-C + HDMI
WIRELESS CHARGING
Note
• Use a switching adapter with a max. 100 W
output or less, which complies with the USB-PD
standard. Ensure compliance with the safety
standards IEC62368-1 (ES1, PS2-compliant –
60 V or less, 100 W or less). Contact the manu-
facturer of the switching adapter if you are not
sure that it complies with the safety standards.