Tripp-Lite 040-008-19 Guia De Inicio Rapido página 8

KVM Operation
Hotkey Hotkey
Command Sequence
Open the OSD [Scroll Lock]
[Scroll Lock]
Menu
[Spacebar]
Change [Scroll Lock]
the Hotkey [Scroll Lock]
Preceding [H], y
y = [Scroll Lock],
Sequence
[Caps Lock],
[Num Lock] or
[F12]
Last Known [Scroll Lock]
Active Port [Scroll Lock]
Restore
Load Default —
OSD —
Appearance
Edit Port —
Names
Auto Scan —
Period
Auto Logout —
OSD Procedure
1
, —
2
,
2
, In the OSD Setup Page,
2
, highlight the Hotkey setting
2
and use the [→] and [←] keys
to select the desired Hotkey
preceding sequence. Press
the [Enter] key to save the
change.
, —
2
, [L]
2
In the OSD Setup Page,
highlight the Load Default
setting and press the [Enter]
key. When prompted to
confirm the action,
highlight Yes and press the
[Enter] key.
In the OSD Setup Page,
highlight the OSD Appearance
setting and use the [→] and
[←] keys to select Yes or
No. Yes turns on the OSD
Appearance function; No turns
it Off.
In the OSD Main Page,
highlight the desired port and
press the [Insert] key. Type
in a port name and press the
[Enter] key. Port names can
be up to 16 characters, using
A – Z, 0 – 9.
In the OSD Setup Page,
highlight the Auto Scan Period
setting and use the [→] and
[←] keys to choose a time
frame between 5 and 95, with
intervals of 5 seconds. Press
the [Enter] key to save the
setting.
In the OSD Setup Page,
highlight the Auto Logout
setting and use the [→] and
[←] keys to choose a time
frame between 00 and 99
seconds. A setting of 00
disables this feature. Press
the [Enter] key to save the
setting.
8
Description
Opens the OSD Menu.
Changes the hotkey preceding
sequence to [Scroll Lock],
[Caps Lock], [Num Lock]
or [F12]
Enables/Disables the feature
that restores the KVM switch
to the last port to have the
KVMs focus prior to a power
failure.
Restores the OSD Settings to
the factory defaults.
Note: This does not affect
password security.
When this setting is turned
on, the OSD will remain open
instead of closing when the
OSD Main Page is used to
switch ports.
Edits the name assigned to
a port.
Sets the amount of time spent
on each computer during an
Auto Scan. The default is 10
seconds.
Sets the amount of inactivity
time before a user is logged
out of the KVM switch,
requiring a password to regain
access. The default is 00,
which disables this feature.