Tripp-Lite 040-008-19 Guia De Inicio Rapido página 9

KVM Operation
Hotkey Hotkey
Command Sequence
OSD Timeout
Title Bar
Position
Password
Hotkeys in a hotkey command must be pressed within 2 seconds of each other
1
for the command to be successful.
definable, and can be changed to [Scroll Lock], [Caps Lock], [Num Lock] or
[F12].
OSD Procedure
1
— In the OSD Setup Page,
highlight the OSD Timeout
setting and use the [→] and
[←] keys to choose a time
frame between 00 and 95
seconds, with intervals of
5 seconds. A setting of 00
disables this feature. Press
the [Enter] key to save the
setting.
— In the OSD Setup Page,
highlight the Title Bar setting
and use the [→] and [←]
keys to choose between 5
options: Disable, Left, Right,
Left Timed, Right Timed. Press
the [Enter] key to save the
setting.
— In the OSD Setup Page,
highlight the Password
setting and press the [Enter]
key. Choose Yes to enable
password security or No
to disable it, and then hit
the [Enter] key. If enabling
password security, you will
be asked to enter in a new
password. Passwords can
be up to 8 characters (A – Z,
0 – 9). If disabling password
security, you will be asked
to enter in the previous
password.
The Hotkey preceding sequence is user-
2
9
Description
Sets the amount of inactivity
time before the OSD is closed.
The default is 30 seconds.
Determines if the Title Bar
is displayed when switching
ports; and, if so, what side of
the screen it is on and how
long it is displayed for. The
timed settings turn the title bar
off after 5 seconds.
Enables/Disables password
security. When enabled, a
user is required to enter a
password to regain access
to the KVM switch after they
have been logged out.