Assembling The Mast To The Base - Invacare Reliant 450 RHL450-1 Manual Del Usuario

5 ASSEMBLY

Assembling the Mast to the Base

1. If locking-type casters are on the patient lift, lock them.
2. Remove the shoulder bolt, nut and washer, that secures the mast
in the U-shape cut-out of the base.
3. Position the mast in an upright position and place the mast into the
U-shaped cut-out of the base.
4. Insert shoulder bolt with washers through the base and mast.
5. Secure with nut.
WARNING
The mast may be removed from the base for storage or
transporting. Each time the mast is removed and
returned to the base, the mast MUST be properly
secured to the base assembly.
Step here to
LOCK.
Manual/Electric Portable Patient Lift
Step here to UNLOCK.
Locking
Lever
Mast
Base
Mast
U-shaped
Cutout
Shoulder
Bolt
16
Washers
Shoulder Bolt
Nut
Washers
Nut
Part No. 1078987