Yamaha ATS-1080 Manual De Instrucciones página 36

Configuring HDMI audio output
Select the device from which audio input via the unit's HDMI IN jack
will be played when the HDMI control function is disabled. HDMI
audio is output from this unit by default.
Settings
The unit (default) Play HDMI audio input signal from the unit.
TV Play HDMI audio input signal from the TV.
1
Turn off the unit.
2
Press and hold SURROUND at least three
seconds.
HDMI audio output switches between the unit and the
TV, and the unit turns on. The indicator shows HDMI
audio output status for several seconds immediately
after the unit is turned on.
NOTE
▪ When playing back HDMI audio input signal from the TV, the unit cannot be used
to adjust volume. Use TV controls to adjust volume.
▪ For details on the HDMI control function, see the following:
– "Configuring the HDMI control function" (p.35)
▪ To configure HDMI audio output with the HDMI control function enabled, select the
audio output device configured for the TV connected to the unit.
▪ HDMI video signals input to the HDMI IN jack of this unit are always output from
the HDMI OUT (ARC) jack of the unit.
Glows (audio is played from the unit;
default)
Off (audio is played from the TV)
36
Setting the auto power standby function
Enabling the auto power standby function prevents the unit from
remaining on when not in use. When the auto power standby
function is enabled, the unit automatically turns off in any of the
following situations.
• No operations for 8 hours
• No audio input and no operations for 20 minutes when Bluetooth
or HDMI is selected as the input source.
1
Turn off the unit.
2
Touch and hold y and touch z on the unit to
turn on the unit.
The auto power standby function is enabled or disabled.
The indicator shows auto power standby function status
for several seconds immediately after the unit is turned
on.
NOTE
The default setting for the auto power standby function varies by country or region.
▪ U.K., Europe, and Korea models: enabled
▪ Other models: disabled
En
Glows (disabled)
Off (enabled)