Publicidad
Idiomas disponibles
Idiomas disponibles
The volume decreases when the unit is
turned on
l The automatic volume adjustment function is activated.
To prevent excessive loudness, the unit automatically controls
its volume within a certain level when the unit is turned on. Turn
up the volume as required. For details, see the following:
– "Basic procedure for playback" (p.25)
No surround effect
l Stereo playback is selected.
Select surround playback or 3D surround playback. For details,
see the following:
– "Playback with 3D surround sound" (p.27)
– "Playback with surround sound" (p.27)
l The volume is too low.
Turn up the volume. For details, see the following:
– "Basic procedure for playback" (p.25)
l The TV or playback device is set to output 2 channel audio
(such as PCM) only.
Change the digital audio output setting on the TV or playback
device to Bitstream.
l Sound is also heard from the TV built-in speakers.
Set the TV volume to minimum. For details, see the following:
– "Basic procedure for playback" (p.25)
l The listening position is too close to the unit.
The listening position should be at some distance from the unit.
Noise is heard
l The unit is too close to another digital or high-frequency
device.
Move those devices away from the unit.
43
En
Publicidad
