JVC EXAD KD-NX5000 Manual De Instrucciones página 111

Symptoms
• SSM automatic presetting does not
work.
• Static noise while listening to the radio. Connect the antenna firmly.
• CALL 1-888-539-SIRIUS TO
SUBSCRIBE appears on the monitor.
• No Signal or NO SIGNAL appears on
the monitor.
• No Antenna or CHECK ANTENNA
appears on the monitor.
• Invalid Channel appears on the
monitor for about 5 seconds, then
returns to the previous display when
listening to the SIRIUS Satellite radio.
• CHANNEL– – – appears on the
display for about 2 seconds, then
returns to the previous channel while
listening to the XM Satellite radio.
• NO NAME appears on the monitor.
• Channels Updating XX%
completed (for SIRIUS) or
UPDATING (for XM) appear son the
monitor.
• OFF AIR appears on the display while
listening to the XM Satellite Radio.
• LOADING appears on the display
while listening to the XM Satellite
Radio.
• Reset 08 appears on the display.
• Satellite Radio does not work at all.
• Disc can be neither recognized nor
played.
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable
discs cannot be skipped.
Causes/Remedies
Store stations manually (☞ [53]).
Start subscribing to SIRIUS Satellite Radio (☞
[55]).
Move to an area where signals are stronger.
Connect the antenna firmly.
No broadcast on the selected channel.
Select another channel or continue listening to the
previous channel.
Selected channel is no longer available or is
unauthorized. Select another channel or continue
listening to the previous channel.
No text information for the selected channel.
The unit is updating the channel information and
it takes a few minutes to complete.
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
The unit is loading the channel information
and audio. Text information are temporarily
unavailable.
Reconnect this unit and the Satellite Radio
correctly and reset this unit.
Reconnect the Satellite radio after a few seconds.
Eject the disc forcibly (☞ [4]).
Unlock the disc (☞ [65]).
• Insert a finalized disc.
• Finalize the discs with the component which
you used for recording.
111
Troubleshooting