JVC EXAD KD-NX5000 Manual De Instrucciones página 94

Menu items
Interlock
Horizontal/
Vertical
Video Format
Beep
Telephone Muting
Reverse Polarization
Connection *12
*8 Reverse lamp lead connection is required. (☞ Installation/Connection Manual)
*9 Speed signal lead connection is required. (☞ Installation/Connection Manual)
*10 Not selectable when Video Input is set to Off.
*11 The TEL MUTING lead connection is required. (☞ Installation/Connection Manual)
*12 This shows the same information as Connection in the Information Menu (☞ [43]).
94
Selectable settings
Off: Cancels.
Reverse: Automatically switch to the camera view when
the gear is shifted into reverse.
Low Speed: Automatically switch to the camera view
when your car slows down.
Horizontal adjustment is required according to how you
would like to see the picture on the monitor. Vertical
adjustment is required according to how you have installed
your camera.
Vertical:
Normal
Vertical:
Reverse
Select the format of video input according to the color
*10
system of the component connected to the VIDEO IN
plug.
NTSC, PAL
Off: Cancels.
On: Activates the key-touch tone.
You can mute the sound of the System (AV source sounds
and voice guidance) while you talk on the cellular phone.
Off: Cancels.
Muting1, Muting2: Select either one which mute the
sounds while using the cellular phone.
Select either of the two which indicates your gear direction
correctly.
GND, Battery
You can check the connection status.
*8
*9
Horizontal: Normal
(Initial setting)
Horizontal: Reverse
*11