Special Functions For Dvd Audio; Operations Using The On-Screen Bar - JVC EXAD KD-NX5000 Manual De Instrucciones

Special functions for DVD Audio

Playing back a bonus group
If a DVD Audio including a "bonus group"
is detected, lights up on the disc
information screen.
1
Select the bonus group.
• The bonus group is usually recorded as
the last group.
2
Enter the key number.
• ☞ next column "To enter numbers"
• "Key number" (a kind of password) for
the bonus group is not open to public.
The way of getting the key number
depends on the disc.
3
Follow the interactive
instructions shown on the
monitor.
Selecting browsable still pictures
When a disc including browsable still pictures
is detected, lights up on the disc
information screen.
When disc shows the BSP selecting icons such
as @ or # on the screen...
1
Select an item you want to
display.
2
68

Operations using the on-screen bar

For DVD/VCD/DivX/MPEG/JPEG discs, you
can check the disc information and use some
functions through the on-screen bar.
1
Display the on-screen bar.
[twice]
• When you press OSD once, the
information bar appears. When you press
it again, the operation bar spreads out
below.
2
Select an item.
3
Make a selection.
If pop-up menu appears...
• For entering time/numbers, see below.
To remove the on-screen bar
To enter numbers
1
Select a number.
2
Move to the next digit.
3
Repeat steps
1
4
• To correct a misentry, use ¤.
• It is not necessarily required to enter trailing
zeros.
and .
2