Garland GAS 500 MG-V19 Manual De Instrucciones página 21

2. SECURITY MEASURES
To avoid mishandling this machine please read all
instructions in this manual before using it for the first
time. All information included in this manual is important
for your personal safety and that of the people, animals
and things surrounding you. If you have any questions
regarding the information contained in this manual
ask a professional or go to the point of sale where you
purchased this machine to resolve it.
The following list of hazards and precautions include
the likely situations that may occur during the use
of this machine. If you encounter a situation not
described in this manual use common sense to use
the machine in the most secure way possible, or if you
see danger, do not use the machine.
2.1. USERS
This machine has been designed to be manipulated
by grown ups who have read and understood these
instructions. This machine may not be used by
persons (including children) with diminished physical,
psychic or mental capacities, or lack of experience or
knowledge.
Warning! Do not allow underage persons to use
this machine.
Warning! Do not allow people who do not
understand these instructions to use this machine.
Before using this machine, familiarize yourself with it
ensuring that you perfectly know where the controls
and safety devices are, and the manner in which it
must be used. If you are an inexperienced user we
recommend you practice doing a simple job and, if
possible, in the company of an experienced person.
The cutting tool of this machine is very sharp. It is
dangerous to use this machine improperly.
Warning! Only lend this machine to persons who
are familiar with this type of machine and know how
to use it. Always lend the machine along with the user
instruction manual so the new user can carefully read
it and understand it.
This machine is dangerous in the hands of untrained
users.
2.2. PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating this machine.
Do not use this machine when you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating this machine
can cause serious personal harm.
Never use the machine without the use of the safety
devices.
Do not modify the controls of this machine or the
engine speed regulators.
Remove all keys or hand tools from the machine and
the work area before starting the machine. A wrench
or tool left near the machine may be touched by a
part of the machine in motion and could project itself
causing personal injury.
Do not exceed yourself. Keep both feet firmly in place
on the ground and maintain balance at all times.
Slippery or unstable surfaces such as stairs may
cause a loss of balance or control over the machine.
Always wear safety glasses and hearing protection. To
avoid injury it is recommended to use additional non-
21/112
English