Descargar Imprimir esta página

Flex FX1231 Manual Del Operador página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

REMOVABLE BELT CLIP (FIG. 6)
Your tool is equipped with a removable belt clip
that can be positioned on the left side of the tool
for convenient transport.
To install the belt clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the rib and the hole of the belt clip with
the opening and the threaded hole on the
base of the tool, respectively.
c. Insert the screw and securely tighten the
screw with a screwdriver (not included).
To remove the belt clip from the tool:
a. Remove the battery pack from the tool.
b. Use a screwdriver to loosen the screw that
attaches the belt clip to the tool.
REMOVABLE BIT CLIP (FIG. 7)
Your tool is also equipped with a removable bit
clip that can be positioned on the side of the
tool for storing bits.
To install the bit clip onto the tool:
a. Remove the battery pack from the tool.
b Align the hole of the bit clip with the threaded
hole on the base of the tool.
NOTICE: Ensure that the protruding part on the
bit clip is kept flush against the step on the base
of the tool to keep it steady.
c. Insert the screw and securely tighten the
screw with a screwdriver (not included).
To remove the bit clip from the tool:
a. Remove the battery pack from the tool.
ATTACHING A STRAP (FIG. 8)
Strap fixing is provided to attach a wrist strap
(not included) in order to reduce the chances of
dropping your tool. Strap the strip around your
hand when carrying the tool.
Fig. 6
Removable
Belt Clip
c. Remove the screw and the belt clip.
Fig. 7
Bit Clip
b. Use a screwdriver to loosen the screw that
attaches the bit clip to the tool.
c. Remove the screw and the bit clip.
Fig. 8
Strap Fixing
-12-
Opening
Rib
Step
Protruding
Part

Publicidad

loading

Este manual también es adecuado para:

Fx1131