Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS FOR DRILL DRIVER
Hold the power tool by insulated gripping
•
surfaces, when performing an operation
where the cutting accessory or fastener
may contact hidden wiring. The cutting
accessory or fastener contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
Secure the work piece. Clamping devices or
•
a vise will hold the work piece in place better
and more safely than holding it by hand.
Do not drill, fasten or break into existing
•
walls or other blind areas where electrical
wiring may exist. If this situation is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
Position yourself to avoid being caught
•
between the tool or walls or posts. Should
the bit become bound or jammed in the work,
the reaction torque of the tool could crush your
hand or leg.
Always wait until the machine has come
•
to a complete stop before placing it down.
The tool insert can jam and lead to loss of
control over the power tool.
When working with the power tool, always
•
hold it firmly with both hands and assume
a secure stance. The power tool is guided
more securely with both hands.
-5-
Publicidad
