Flex FX1231 Manual Del Operador página 14

FUNCTION-SELECTION RING (FX1231 ONLY)
AND TORQUE-ADJUSTMENT RING
(FIG. 11 AND 12)
WARNING
when the tool is running.
Your tool is equipped with a function-selection
ring (Model FX1231 only) and torque
adjustment ring for various applications. Move
the ring depending on the requirements of your
task.
The proper setting depends on the job and the
type of bit, fastener, and the material you will
be working on. In general, use greater torque
for larger screws. If the torque is too high, the
screws may be damaged or broken.
FX1131 (Fig. 11):
Your drill features 18 torque settings for driving
and 1 drilling setting. Output torque will increase
as the ring is rotated from 1 to 18.
Adjust the torque by rotating the torque-
adjustment ring. The higher the torque setting,
the more force the tool produces to turn an
object.
The drilling setting
to permit drilling and other heavy-duty
applications.
FX1231 (Fig. 12):
Your hammer drill features 24 torque settings,
1 drilling setting, and 1 hammer drilling setting.
Output torque will increase as the ring is rotated
from 1 to 24.
The Drill setting
permit (non-hammer) drilling and other heavy-
duty applications.
The Hammer Drilling setting
clutch to permit hammer drilling only.
NOTICE: Do not use the hammer drilling
setting for drilling in wood, metal, ceramic, and
plastic to prevent the drill/screw bit from being
damaged.
Do not adjust the torque
or function-selection ring
will lock the clutch
will lock the clutch to
will lock the
Fig. 11
Torque-Adjustment
Ring
Fig. 12
Function-Selection Ring
Torque-Adjustment
Ring
-14-