Mounting / Installation; Mounting The Camera; Important; Aligning The Camera - Abus TVIP11560 Manual De Instrucciones

6. Mounting / installation

6.1 Mounting the camera

IMPORTANT!

The camera must be disconnected from the power supply during installation.
Use the drilling template supplied for drilling the mounting holes. The drilling distance is 44 mm.

6.2 Aligning the camera

Aligning the camera is done by using the ball joint. To do this undo the fixing screw and adjust the camera.
Setting the angle of inclination
Inclination: 0°–90°
Do not forget to tighten up the screws again.
76
English