Samson EXPEDITION XP208w Manual Del Propietário página 13

Using the LINE OUT Jack
The XP208w LINE OUT jack allows you to connect the XP208w with any powered speaker to
expand your system or link two XP208w systems together to daisy chain the speakers.
Using a standard shielded 1/4" instrument cable, connect the LINE OUT on the XP208w
to a line level input of second powered speaker. The XP208w will send a mix of all inputs,
including Bluetooth® audio. Each channel VOLUME will control corresponding output level
to the LINE OUT jack.
Using a Speaker Stand
The XP208w includes a 1 3/8" (35mm) pole mount
receptacle on the bottom of the cabinet. This fits a
standard 1-3/8" (35mm) speaker stand. For maximum
coverage when using a speaker stand, the speaker
should be raised above the heads of the listening
audience.
Take care when placing the speaker on a stand, to
ensure that it is on a level, steady surface and will not
tip over. Use a stand designed to support a speaker
with a minimum weight of 30lb.
XP208w • Portable PA System 13