Look 795 BladeRS Manual página 28

EN
HANDLEBAR ASSEMBLY
1 - Place the handlebar (38) on the stem (8)
2 - Insert the threaded inserts (44.1) into the
handlebar (38), then tighten the screws (37.1) to a
torque of 6 Nm.
3 - Fit the cover (36) into the handlebar (38), then
tighten the screw (45) to a torque of 1 Nm.
COMPUTER MOUNT ASSEMBLY
NOTE : The computer mount is compatible with
Garmin, Wahoo and Polar devices.
1 - Pre-assemble your computer mount by choosing
the appropriate mounting bracket for your computer
manufacturer.
2 - In the kit supplied with the bike, you will find two
screws (37.2) and two larger threaded inserts (44.2).
Use them to replace two of the original (37.1) screws
and two of the (44.1) threaded inserts already in
place.
3 - Place the computer mount under the stem (8).
4 - Place the two inserts (44.2) under the computer
mount.
5 - Tighten the screws (37.2) to a torque of 6 Nm.
EN