Bianchi E-ARCADEX Manual Del Usuario página 8

Image 1H
CARGO RACKS, PANNIER RACKS AND MUDGUARDS
The pannier racks and mudguards are designed to be assembled as a single component, with the pannier rack mounted directly onto the rear
mudguard. The pannier rack provided with the product is rated to a maximum load of 15 kg (Image 1K) in this combination only.
WARNING!
The maximum load of 15 kg is only guaranteed if assembled
using the mudguards provided.
Side panniers can be mounted using flexible hook and
loop closure and/or strap systems. There is no specific
recommended pannier fixing system.
WARNING!
The cargo rack cannot be assembled without the
mudguards provided. The 15 kg maximum load is only
and exclusively guaranteed if the two components are
assembled together.
The mudguards provided have a cross-section of 46 mm
and are compatible with tyres up to a maximum of 40 mm.
LIGHT SYSTEM
The bike has front and rear lights. Both lights can be switched on or off from the remote control dashboard of the remote control of the pedal-assist
system. The front light is mounted on the handlebar, while the rear light is integrated into the rear mudguard.
ADDITIONAL TECHNICAL INFORMATION
Not all components available on the market are compatible with the E-Arcadex frame.
Not all devices available on the market, such as child seats, stabilisers and bike cargo trailers, are compatible with the E-Arcadex frame.
Only the components specified on the product have been tested by Bianchi. Please check design and compatibility before purchasing new products.
WARNING!
Before purchasing and assembling products and/or devices, always check that the bike and the components are fully compatible. Bianchi does not
provide any guarantee or assume any responsibility in the case of product damage.
8
Image 1K
Image 1J