Descargar Imprimir esta página

WIKA PEW-1 Serie Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Safety
3.7 Approved battery
To ensure proper operation and the best possible performance, use only the batteries listed below:
Sensor type
Model PEW-1000
(LoRaWAN
®
and
Bluetooth
®
)
Model PEW-1200
(Bluetooth
®
)
CAUTION!
Physical injuries and damage to property and the environment
Lithium thionyl chloride batteries are not rechargeable. Improper handling can lead to leakage or escape of
vapourised electrolyte vapours and cause a fire or explosion.
Do not open the battery.
Do not damage the battery cells.
The positive and negative connections must not be short-circuited with conductors.
Do not reverse the polarity.
Do not expose the battery to excessive mechanical loads.
Do not expose the battery to water or condensation.
Do not heat, solder or expose the battery to fire.
Do not use any rechargeable batteries!
Do not continue to use batteries that have been dropped on the ground.
WIKA operating instructions, models PEW-1000 and PEW-1200
Designation
Lithium thionyl chloride battery (model Tadiran SL860/S) and hybrid layer capacitor (model Tadiran
HLC1020L) as an assembly with connection cable assembled
Lithium thionyl chloride battery and hybrid layer capacitor (model Tadiran HLC1020L) as an
assembly with connection cable assembled.
Model Tadiran SL861/S
Model Tadiran SL860/S
Attention: The current battery may only be used with the appropriate enclosure type, see dimensions
in chapter 8 "Specifications".
EN
11

Publicidad

loading