Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 3
Fig. 3
The cleaning operation must be carried out by a fl ue specialist,
who must clean the duct of any fl ue gases, the fl ue and the
chimney stack, also checking their effi ciency and issuing a written
declaration confi rming the safety of the system. This operation
must be carried out at least once per year.
Cleaning the tank and auger
Each time the pellets are refi lled, check for the presence of any
dust/sawdust or other scraps on the bottom of the tank. If present,
remove it with the help of a vacuum cleaner.
The hand protection grille must never be removed from
its housing. Clean the bottom of the tank and the visible
part of the auger.
Cleaning the painted metal parts
Use a damp cloth to clean the painted metal parts. Never use
degreasing substances such as alcohol, thinners, acetone,
benzene, as these may irreparably damage the paint.
Poujoulat Versions
For versions with integrated poujoulat (fi g.5) remove the fl ue gas
exhaust inspection cap and vacuum the combustion residue.
Fig. 5
Fig. 5
02/2023 - EN
Fig. 4
Fig. 4
25
Publicidad
