Publicidad
Idiomas disponibles
Idiomas disponibles
Lubrication
WARNING!
Before lubricating, repairing, or
inspecting, always disengage PTO, set parking brake,
stop engine and remove key (if equipped) to prevent
unintended starting.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system and lift linkage
at least once a season with light oil.
Rear Wheels
The rear wheels should be removed from the axles once a
season. Lubricate the axles and rim hubs well with an all-purpose
grease before reinstalling them.
Front Wheels
Each of the front wheel axles and casters is equipped with a
grease fitting. See Figure 6-4. Lubricate with a No. 2 multi-
purpose grease applied with a grease gun after every 25 hours of
mower operation.
Figure 6-4
Blade Timing Belt
The cutting deck spindles are driven by a blade timing (cogged)
belt, assuring that the deck blades are always perpendicular to
each other. At least once a season, or after striking any foreign
object, check the timing belt as follows:
1.
Remove the belt cover by removing the three screws (a)
and washers (b) which secure it to the frame.
See Figure 6-5.
(b)
(a)
Figure 6-5
WARNING!
Do not operate mower without the
belt cover installed. Failure to follow this instruction
could result in personal injury or property damage.
S
6 — M
ection
(a)
(b)
(a)
(b)
& a
aintenance
djuStMentS
21
Publicidad
