Publicidad
Idiomas disponibles
Idiomas disponibles
10.
POOL GROUND
The Pool Ground Kit is intended for functional and not safety purposes. It enables static electricity, whatever its source,
to be transferred from the pool water to the ground. In some cases, static electricity can stimulate the emergence of
oxidation phenomena of metal parts in contact with pool water. Static electricity can also disturb the working of probes,
which can lead to the equipment as a whole not working correctly.
1) Screw and tighten by hand the Pool Ground Kit into the bracket provided (accessories holder).
2) Connect the Pool Ground Kit to a ground rod (not supplied) using a copper cable without isolating sleeve (not
provided).
3) Insert the whole ground rod into the ground.
• You must comply with the specifications of installation standards in the country and at the time of the
installation.
• The ground rod should be sited at a distance and unaffected by any other electrical ground rod/device.
• The ground rod must be at least 1.5 m long.
• The ground in which the ground rod is inserted should be as wet as possible.
• Installation resistance of the ground rod must be less than 20 Ω.
I
24
Publicidad
