Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING FROM THE CONTROL PANEL
TURNING THE APPLIANCE ON/OFF
will be automatically reduced and in the next few minutes it will
be further reduced.
To turn the appliance off, touch the
Note: Never turn off the air conditioner by simply pulling the
plug. Touch the
key in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status checks.
AIR CONDITIONING MODE
This is ideal for hot and humid weather
when the room needs to be both cooled
and dehumidified.
To correctly set this mode:
• Touch repeatedly the MODE key until
the air conditioning symbol appears.
The display will show the desired tem-
perature.
• To change the temperature to be
reached, touch the < C4 or > C3 key.
Before plugging the appliance
check the cap on back of the
unit is correctly inserted on
drainage hose A11.
Insert the plug in the socket.
Two dashes appear on the display
indicating that the appliance is in
stand-by.
Touch the
C1 key to turn on the
appliance.
When the appliance comes on, the
last function set before it was shut
off is activated.
NOTE: After few seconds of the con-
trol panel inactivity, its brightness
key.
MODES SELECTION
To select the desired operating mode,
touch repeatedly the MODE key until
the desired function is selected.
WiFi FUNCTION
To select or deselect the Wifi func-
tion, keep touched the MODE key for
3 seconds.
Note: In conditioning mode, the air flow can be selected only
from the remote control and app.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in the
room (spring and autumn, damp rooms,
rainy periods, etc). For this type of use, the
appliance must be set up as for air condi-
tioner mode. That is, the air exhaust hose
B2 must be fitted to the appliance to allow
the humidity to be discharged outside.
To correctly set this mode:
• Touch repeatedly the MODE key until
• The appliance automatically chooses
FAN MODE
When using this mode, the air exhaust
hose B2 does not need to be attached to
the appliance.
To correctly set this mode:
• Touch repeatedly the MODE key until
• Select the desired air flow by touching
The available air flows are:
Minimum air flow: when maximum silent
operation is desired.
Medium air flow: when the noise level needs to be
low but with a good comfort level.
Maximum air flow: for maximum performance.
SELECT THE TEMPERATURE SCALE
8
the dehumidifying symbol appears.
the best air flow.
the fan
symbol appears.
the increase > C3 or decrease < C4
keys.
The temperature can be displayed in °C
or °F.
To change the temperature unit of
measure touch both the increase/de-
crease keys > D5 and < D4 for about
10 sec.
Publicidad
