Kohler BN330S-N0 Instrucciones De Instalación página 7

3. Install the Seat
Position the Seat
Slide the seat onto the mounting plate until you feel the seat snap into place.
Check the seat position. Adjust the position if needed.
Adjust the Seat
Remove the seat by pressing the release button and sliding the seat forward.
Reposition the mounting plate as needed.
Secure the Seat
Securely tighten the mounting plate bolts and nuts.
Slide the seat onto the mounting plate until you feel the seat snap into place.
Attach the Water Line
IMPORTANT! Use only the water line included with the seat. Using a different hose
may damage the seat components.
NOTICE: Use care to avoid cross-threading or overtightening the connections. Use
an adjustable wrench to tighten one-quarter turn past hand-tight.
Connect the water line to the seat. Do not overtighten.
Kohler Co. 7
Release
Button
1321456-2-C