Winix Smart Set Up - Winix T1 Manual De Usuario

WINIX SMART
1. Connecting to WINIX SMART
WINIX SMART allows you to conveniently control your air purifier from any location.
WINIX SMART is optimized for the following specifications. Depending on your
device capabilities and service parameters, some functions may not be supported.
ANDROID
iOS
(6.0 or later recommended - iPhone 4S or later)
Before connecting to WINIX SMART
• A Wi-Fi wireless router must be installed within range of the air purifier to use WINIX SMART.
• Ensure Wi-Fi router matches the following specifications; 802.11b/g/n 2.4GHZ or for a dual-band wireless
router (2.4GHz/5GHz), be sure to select 2.4GHz.
• Be sure to have the Wi-Fi password handy.
• During registration, please keep the air purifier, wireless router, and smart device within a 32 ft. radius.
• Obstacles between the air purifier, wireless router, and smart device may cause weak reception.
• Before connecting, users with a "Smart Network Switch" on their device should temporarily disable it.
• Once WINIX SMART has been connected, the "Smart Network Switch" on your device can be enabled.
Initial Setup
Connecting to the unit for the first time.
Download the WINIX SMART app on your device.
①
available via Google Play store or iTunes App store.
Turn the unit Wi-Fi on.
②
Select the Menu Screen.
Select Settings.
Select Wi-Fi.
Select [ON] to enable Wi-Fi.
English
(ICS 4.12 Jellybean or later recommended)
19
T1