Publicidad
Idiomas disponibles
Idiomas disponibles
Open the Case.
Insert the buckle opener accessory into the buckle opening lever as shown in
the figure (in direction ①) Pull the buckle opener slowly (in direction ②).
When not using the buckle opener, hold the buckle opening lever with your
thumb and index finger from the side and pull it up slowly.
①
②
Load the digital camera.
Quietly load the digital camera into the Case, taking care that the projecting
part of the zoom lever of the digital camera properly fits into the recessed
part of the zoom lever of the Case.
CAUTION
： ・When the setting is insufficient, the loading of the camera
becomes imperfect and it may not be possible to seal the
Case or zooming may not function. Insufficient sealing will
cause water leakage.
Note
： ・ At this time, the LCD should be left switched off to save the
battery.
E-16
Publicidad
