RDS
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP (
tor will light.
2
Press TA to turn traffic announcement
standby on.
Press TA and TA ON appears in the display.
The tuner will standby for traffic announce-
ments.
# To turn traffic announcements standby off,
press TA again.
3
Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Press to increase or decrease the volume.
All manuals and user guides at all-guides.com
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
# You can also cancel the announcement by
pressing SOURCE, BAND, a, b, c or d while a
traffic announcement is being received.
! You can also turn on or off TA function in the
! The system switches back to the original
! Only TP and enhanced other networks TP sta-
Responding to the TP alarm
When a TP or enhanced other networks TP
) indica-
station is lost due to a weak signal the TP (
indicator is extinguished and a series of short
beeps, about five seconds long, sound to re-
mind you to select another TP or enhanced
other networks TP station.
% When listening to the tuner, tune in an-
other TP or enhanced other networks TP
station.
Press TA while a traffic announcement
Notes
menu that appears with the pressing of
FUNCTION.
source following traffic announcement recep-
tion.
tions are tuned in during seek tuning or BSM
when TA is on.
Section
05
)
13
En