Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Model
Input power source
Charging time
Charger
Weight
APPLICATIONS
For charging the HITACHI batteries types BSL25 and BSL36 series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
1. Insert the plug of battery charger into the receptacle.
When the plug of battery charger has been inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
8
UC36YRL
Single phase: AC 120 V, 60 Hz
Approx. 60 minutes .......... BSL2530
Approx. 80 minutes .......... BSL3626
Charging voltage .............. DC 25.2–36 V
Charging current .............. DC 25.2 V: DC 3 A, DC 36 V: DC 2 A
2.0 lbs (0.9 kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
WARNING:
Do not use the electrical cord if damaged. Have
it repaired immediately.
Publicidad
