Publicidad
Idiomas disponibles
Idiomas disponibles
2. Insert the battery to the battery charger.
Firmly insert the battery into the charger until the line is visible, as shown in Fig. 2.
BSL2530
3. Charging
When the battery is connected to the battery charger, charging will commence and the
pilot lamp will light in red. (See Table 2)
NOTE: If the pilot lamp flickers in red, pull out the plug from the receptacle and check
if the battery is properly mounted.
When the battery is fully charged, the pilot lamp will blink in red slowly. (At 1-second
intervals) (See Table 2)
BSL3626
Fig. 2
English
Line
9
Publicidad
