ELECTRIC BLENDER
8
For attaching Jar, Place the Jar into the motor unit directly in
place, (see fig.1).
Note: make sure the Jar is assembled into the motor unit
properly, there is interlock switch on the position, if the Jar is
not assembled properly, the blender will not operate. .
Blending fruit and vegetable:
1. Before attaching the power cord into the outlet, make
sure the Switch button is in the 0 position.
2. Peeled or cored the fruit or vegetables and then cut it
into
small dices, put the food piece into the Jar. Usually
certain amount of purified water has to be added to
facilitate the smooth running of appliance. The proportion
of the food and water is 2:3.The amount of mixture should
not exceed the max level as indicated on the Jar.
Note: never use boiling liquids or run the appliance empty. The Jar can be used for
breaking up ice.
3. Replace the Jar cover on the Jar. Turn the Jar cover into the Jar.
4. Turn the Switch button to the desired setting, there are two settings: P, 0, 1,2. Turn
switch to P position and hold it to pulse actuate motor for delicate chopping. Release
it to return the 0 position.
5. The consecutive operation time shall less than 3 minutes. Minimum 1 minutes rest
period is required between two consecutive cycles.
7. Turn the Switch button to 0 Position once the mixture has been blended to your
desired consistency.
8. Remove the Jar from the Motor Unit (remove it by directly upward), carefully take
down the Jar cover, then pour and serve.
Cleaning and Maintenance
The Auto Clean feature can clean the blender and blade assembly easily, rapidly in
complete safety.
-Pour a little warm soapy water into the Jar and turn the Switch button to P position for
a few seconds.
-Remove the Jar from the motor unit by directly taking it upward and rinse the Jar, Jar
cover under running water.
-Wiping the outer surface of Motor Unit with a damp cloth, do not use abrasive
cleansers. Never immerse in water for cleaning
-Dry all parts and then replace them
For complete cleaning, you can hold the blade assembly at the bottom of jar carefully,
for it is sharp, take it out by turning coupling on the other side clockwise emphatically
(see Fig.2), then put the detachable accessories into Dishwasher for clean, they are
dishwasher safe components, but the temperature setting shall not exceed 70°.
fig.1