Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
circumstances.
f)
Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
Do not lose this safety information.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Have damaged parts repaired before
using the appliance. Many accidents are
caused by badly maintained electric tools.
f)
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, attachments, etc. in accordance with
these instructions. Take the conditions in
your work area and the job in hand into
account. Using electric tools for any purpose
other than the one for which they are intended
can lead to dangerous situations.
Anl_SA_TC_MA_1300_SPK8.indb 30
Anl_SA_TC_MA_1300_SPK8.indb 30
GB
5. Service
a) Have your electric tool repaired only by
trained personnel using only genuine
spare parts. This will ensure that your elec-
tric tool remains safe to use.
Do not lose these safety instructions
Safety information for cutting-off machines
a) The safety hood belonging to the electric
tool must be securely fastened and ad-
justed so that it off ers maximum safety,
i.e. only the smallest possible part of the
grinding wheel is allowed to point openly
in the operator's direction. Make sure that
you and any other persons in the vicinity
are not on a level with the rotating grin-
ding wheel. The safety hood is designed to
protect the operator from broken pieces and
accidental contact with the cutting-off wheel.
b) Use only bonded, reinforced or diamond-
tipped cutting-off wheels on your electric
tool. Just because you can attach an acces-
sory to your electric tool does not guarantee
that it can be used safely.
c) The maximum speed of the plug-in tool
must be at least as high as the maximum
speed specifi ed on the electric tool. Ac-
cessories which rotate faster than the maxi-
mum speed may break and be catapulted out
of the tool.
d) Grinding/sanding wheels may only be
used for the applications for which they
are recommended. For example: Never
grind/sand a side surface area with a
cutting off wheel. Cutting-off wheels are
designed for removing material with the edge
of the wheel. Applying lateral force to these
cutting-off wheels can cause them to break.
e) Always use undamaged clamping fl anges
of the correct size and shape for the
grinding/sanding wheel you have selec-
ted. Suitable fl anges support the grinding/
sanding wheel and thus reduce the risk of the
grinding/sanding wheel breaking. Flanges for
cutting-off wheels may diff er from the fl anges
for other grinding/sanding wheels.
f)
Do not used worn grinding/sanding
wheels from larger electric tools. Grinding/
sanding wheels for larger electric tools are
not designed for the higher speeds of smaller
electric tools and may break.
g) The external diameter and thickness of
the plug-in tool must comply with the
dimension specifi cations of your electric
- 30 -
29.01.2019 08:52:23
29.01.2019 08:52:23
Publicidad
