Descargar Imprimir esta página

ARENDO 305032 Manual Del Usuario página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6. Initial use
1. The dehydrator trays must be clean and wiped with a cloth be-
fore using them for the first time.
2. Place the prepared food items on the desired trays. Then place
the trays correctly in the dehydrator and put the lid on the ap-
pliance.
3. Note that the strong aromas from some food items may be
transferred to other food items. This may adversely affect the
taste.
4. Connect the power cord to the appliance and press the "ON/
OFF" button. The appliance switches on.
5. Select the desired temperature and duration using the "UP" and
"DOWN" buttons. You can switch between temperature and du-
ration using the "SET" button. Depending on whether you want
to set the temperature or duration, either a time-symbol or a
thermometer-symbol is shown next to the display.
6. Once the food items are dried completely, the appliance switch-
es to standby mode. You will hear two beeps. Disconnect the
mains plug to switch off the appliance completely.
7. Clean the drip tray and the liquid collection chamber after dry-
ing.
Note: For smaller food items to be dried, we recommend the use of
fine-mesh inlay mat.
7. Process of drying food items
(The following examples are for reference only)
Note: Always remember that the values shown here are for refer-
ence only.
Fruits
1. Cut the fruit into pieces of your desired size.
English
25

Publicidad

loading

Este manual también es adecuado para:

30352920201014sz012