EINHELL GE-CT 36/30 Li E Manual De Instrucciones página 14

that the angle of the cutting edge is not altered in
the process. File in one direction only.
7.5 Replacing the line safety guard (Fig. 21)
If you need to replace the line safety guard (13),
remove any screws if there are any, press the lugs
(25) in and pull off the line safety guard. Press the
lugs (25) on the new line safety guard (13) into the
location holes provided.
7.6 Maintenance
There are no other parts inside the equipment
which require maintenance.
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The equipment has an integrated wall holder (Fig.
22/Item 26) to enable it to be hung on the wall.
Anl_GE_CT_36-30_Li_USA_SPK7.indb 14 Anl_GE_CT_36-30_Li_USA_SPK7.indb 14
EN
10. Faults
The equipment does not work:
Check that the batteries are charged and whether
the charging unit is working. If the equipment will
not work in spite of the voltage supply being OK,
please visit a service center.
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of Einhell Germany
AG.
Subject to technical changes.
- 14 -
06.12.2022 09:48:37 06.12.2022 09:48:37